A foul smell is a dead giveaway that your drain is clogged. Several ways to tackle a blocked drain include using a snake-like steel coil, boiling water, or a Nuflow hydro hose. Read on to find out which method works best for you. Then, when all else fails, you can try the tips below. Let’s get started. First, you can try snake drain cleaners. The snake-like coils insert themselves into pipes and swirl in a way that a clog is cleared. The snake’s sharp end is designed to pick up hair, dirt, and other particles blocking the drain.
Foul smells are a dead giveaway for a blocked drain.
You may have noticed puddles of water in your sink. However, these are not always the only signs of a blocked drain. For example, if you have low water pressure, tree roots may have blocked your drain. When you suspect that the problem is due to tree roots, call a plumber to investigate. They will be able to identify whether a tree root is causing the problem and fix the problem.
A foul smell is another indicator of a blocked drain. This could be due to a buildup of debris, oil, or grease. Those things aren’t good for the environment. Foul odours can also indicate a damaged sewer line. A clogged drain can be expensive to fix. A simple unclogging can be costly. A more involved and time-consuming job can cost you as much, and the worst-case scenario could cost you.
Using a snake-like steel coil
Using a snake-like steel coil is a common way to clear clogs. These tools are typically 25 feet or longer and can be pushed into the drainpipe with a handle. When the snake reaches the clog, turn its handle to rotate it against the blockage. The snake then dislodges the blockage and can be pulled up. Its use is simple and effective. Other methods can eliminate many clogs, but a snake will remove more stubborn ones.
When using a snake, ensure that the wires on the handle are straight and that there is no tangle. Using a cable that is too loose will not help clear a blocked drain. You should rotate the handle consistently, not too fast or too slowly. Once you feel pressure on the snake, you can continue rotating the snake until it reaches the main sewer system.
Boiling water
One of the easiest methods to unclog blocked drains in Adelaide is to pour boiling water down the drain. However, this method is not suitable for PVC pipes. Instead, you can use baking soda and vinegar, two common ingredients in cleaning products. The baking soda acts as an alkali, while the vinegar has an acidic effect, so they react chemically to form a bubbling solution. The combination will unclog the drain, allowing it to function normally again.
While boiling water may seem like a simple solution to unclog a drain, the problem is that boiling water can push the clog deeper into the pipe. When this happens, the clog may be comprised of grease, oil, or hair, which will not dissolve in water. Boiling water can also damage pipes and porcelain bowls. For these reasons, it is better to use chemicals or other methods.
Using a Nuflow hydro hose
If your blocked drains in Adelaide are getting you down, use a Nuflow hydro hose to clear them out fast. These hydro hoses are equipped with nozzles that spray a stream of water either forwards or backwards through the pipe. The high-pressure water easily cuts through tree roots, dislodges pipes, and flushes debris. When you use Nuflow to clear your blocked drains, you can rest assured that your plumbing system will return to normal within a few days.
One of the best things about using a NuFlow hydro hose to clear blocked drains in Adelaide is the ease of use. This tool is designed to fit into an existing pipe opening, requiring no pipe excavation. With a 360-degree nozzle, you can easily work the nozzle into a pipe. NuFlow plumbers use hydro jetting to clear blockages, mineral buildup, and tree roots.